“A big thank you to the team at Southern Rewind for getting my hot tub pump and motor up and running . Great job Guys.”
Grease deteriorates with time, so even bearings that have been packed with high quality grease will eventually need re-lubrication. Grease deteriorates because the oil base gradually breaks down from oxidation or evaporates. Then, you’ll need to consider lubricating bearings around Lethbridge.
Lubrication intervals vary greatly depending upon the type and size of bearing used, as well as upon the operating conditions. To re-lubricate bearings, follow the machine manufacturer's specifications. Begin by cleaning the grease fitting and removing the drain plug. After adding the new grease, run the unit for about an hour before reinstalling the drain plug. This purges excess grease without damaging the windings. If the manufacturer's lubrication specifications are not available, the bearing re-lubrication intervals chart below may be used.
1800
143T-256T
284T-326T
364T-365T
404T-449T
505U-587U
*
4 years
1 year
9 months
6 months
*
18 months
4 months
3 months
2 months
1200 & Below
143T-256T
284T-326T
364T-449T
505U-587U
*
4 years
1 year
9 months
*
18 months
4 months
3 months
If you still have questions, or would like to get started with our services, CONTACT US TODAY.