Irrigation system

Signs Your Pump Needs Repairs

Did you know that the efficiency of your machine depends on how well you service your pumps? And without a good irrigation system, it can fail completely and cause even bigger expenses.

Luckily, our guide is here to provide you with common mistakes made when using irrigation systems and how to avoid them.



Changing Water Pressure

If your water pressure keeps changing on its own, this could be a sign that you need repairs or a replacement.

Sometimes the water pressure can get too high, causing the sprinkles to break down. You could also experience low water pressure, which also causes damage to your crops, as they're not receiving the proper watering.

If this is the case, start looking for a small motor repair. Luckily, they can check your pumps and motor to see where the problem lies.


Excessive Noise 

When people are experiencing a lot of excessive noise with their irrigation system, it often means something is wrong. Although some noise is normal, any loud rumbling or vibrational noises should be checked by a technician.

Constantly Overheating When in Use

A proper irrigation system should be able to regulate its temperature while in use. So if your system is overheating, it's a sign that you need a motor repair.

Overheating can also happen because of weather changes. However, most of the time, it's because you need a part that have broken down.  

Lack of Performance 

If you've noticed your irrigation system is not performing up to its standards, then it might be another sign the pump needs maintenance or repair. Your irrigation system and its parts should be able to serve you for many years. 

So if your system is newer and still having performance problems, then a further inspection is necessary. 


How Can You Avoid Premature Damage?

By doing regular maintenance and routine checks, you can save yourself a lot of time and money! So be sure to check your parts and service them properly.

Centrifugal pumps and turbine pumps are the most commonly found in irrigation systems. These pumps are directly connected to the motor mount. So, by not servicing them correctly, you could end up needing a small motor repair. 

This step only takes a few minutes and it can help you figure out common problems. For example, wear and tear, lubrication issues, and excessive grime and dirt!

A good way to test for these problems is by carefully touching the bearings. If they're too hot to the touch, it could indicate a faulty motor or not enough lubrication.


Reliable Small Motor Repair Service

Irrigation systems can be hard to maintain, but by doing so, you can save hundreds on future repairs. So follow these simple rules to ensure a healthy system.

But if you do find yourself needing an electric motor repair, make Southern Rewind your first choice. We service a variety of brands at an exceptional price; contact us today for a quote.